Remove Bathroom Sink Plug. With the plug out of the drain opening, you can repair or replace the drain plug spring and get your bathroom sink drain operating. Pinching the clip will release the clevis from the pivot rod.
Doing a bit of extra maintenance if you are disassembling your drain to service the drain plug mechanism, you might consider giving the entire drain a. Discard it in the trash to help prevent a clog. Pinching the clip will release the clevis from the pivot rod.
To remove the stopper, you have to disassemble this linkage.
Move the rod to a different hole while you’re replacing the spring clip. Once this is done, assemble everything back into place. Avoid flushing any debris from the sink stopper down the drain;
Climb out from under the cabinet, remove the sink stopper and clean it.
Clean the stopper with fine steel wool or a stiff brush and soap. The first step is to look under your sink. Remove the rod from the sink stopper and set it aside.
After removing your sink plug, set it atop a clean washcloth.
To proceed, you’ll need to use a pair of pliers to remove the securing nut from the basket. The sink flange can now be removed. The other type of pop up plugs need to be removed from under the sink.
Easy to follow, clear & complete instructions.bathroom sinks often clog up because hair and scum collect under th.
In order to perform the removal of the flange, you will need to access the sink from the bottom. Remove the rod from the sink stopper and set it aside. The project usually can be completed in approximately 15 minutes.
If it becomes trapped, can use pliers to free it.
The suction cup bottom does the rest. 9 easy s to remove a bathroom sink stopper my pop up drain is not draining water delta larkin chrome 2 handle widespread watersense bathroom sink faucet with drain in the faucets department at lowes repair for a leaky drain plug this old house. Try lightly lifting the stopper and turning it around.
No comments:
Post a Comment